Retailer Section

 

Products

 

 

  

 

Endorsed by major cylinder manufacturers, including Luxfer and Catalina, Visual Plus 3 is the best inspection technology you can buy today - and because of its exclusive software and versatile calibration features, Visual Plus 3 will be the equipment of choice for inspecting new aluminum alloys in the future.

  
AIT has once again advanced the state of the art with Visual Plus 3, the “smartest” eddy-current device available since it eliminates human error and clearly identifies all types of cylinder damage and defects. More than an upgrade of existing technology, Visual Plus 3 offers all-new computerized features that make it the best tool for inspecting cylinders made from all types of aluminum alloys now in use, including popular 6061 alloys favored by major global cylinder manufacturers. Visual Plus 3 not only detects cracks… it identifies corrosion, gouges, pits, folds, valleys, tool stops and other types of indications and it shows you the differences among them on five different color-coded graphs, including both linear and three-dimensional views, on a computer screen.

 

  
Visual Plus 3 Offers these unique features and benefits:  
PROBE DESIGN:
  • Eliminates multiple connections.
  • Enables precise measurement of probe travel.
  • Provides consistent, accurate results.
  • RPM meter indicates probe speed.
  • Discriminates among cracks, corrosion, folds, tool stops and other anomalies.

COMPUTER BASED:

  • Operates on any computer using Windows 98
  • or newer Windows operating systems.
  • Electronic updates of firmware and software.
  • Internet diagnostics available.
  • Detects alloy differences (e.g., between 6351and 6061 alloys).
  • Optional USB port available for power and mobile testing.

RECORDED INSPECTION RESULTS:

  • Five different color graphs.
  • Individual views of each cylinder thread.
  • Thread overlays.
  • Linear views.
  • 3D views.

 

 CALIBRATION WIZARD:
  • Eliminates human error.
  • Easy, step-by-step calibration procedure.
  • Positive verification of accurate calibration.
  • Stores calibration data and probe type on each inspection.
  • Notifies operator if recalibration is needed.

AUTOMATIC ANALYSIS:

  • Automatic pass/fail.
  • No interpretation needed—eliminates operator error.
  • Precisely locates and identifies all types of anomalies.
  • Positively detects potentially dangerous cylinders.
  • Easy, fast, accurate inspections greatly reduce labor time.

     

DATA STORAGE:

  • Automatically stores all data required by HM-220F (USDOT).
  • Stored data includes operator identification, calibration, cylinder serial number, probe type, inspection results, hydrostatic retest information & date.
  • Facilitates database sharing.
  • Uses popular PSI format visual inspection report.

 

  
Download a PDF document (536K) explaining the latest product from AIT - Visual Plus 3! Call us at (951) 776-9994 or email for more information.  

©2001 Advanced Inspection Technology. All rights reserved. 
Email the webmaster with comments or suggestions for the site.